When Programmers Should Know G Code

Basics 2 May 2025

Chatter and Feed Rate Scheduling
SPONSORED 1 May 2025

Automation is for Everyone
SPONSORED 1 May 2025

The Smarter Way to Take Full Control of Your CNC Machine Shop
Data-Driven Manufacturing 30 Apr 2025

The Shift Toward Smarter Shops: Real-World Stories of Data-Driven Manufacturing
28 Apr 2025

How I Made It: Mark and Nancy Rohlfs
Turning Machines 25 Apr 2025

How I Made It: Aneesa Muthana
23 Apr 2025

3 Strategies for Effective CNC Programming Standardization
Automation 22 Apr 2025

3 Trends From PMTS 2025
Automation 21 Apr 2025

Enhancing the Shop Floor with AI
Inspection and Measurement 18 Apr 2025

Surface Finish Underfoot

Published 1/18/2010

When Programmers Should Know G Code

The majority of programmers use some kind of CAM system to prepare their CNC programs. The product of any CAM system is a G-code program from which the CNC machine will run. While CAM systems simplify programming, most programmers have to know something about G code. How much they must know depends upon five factors.

Basics

Mike Lynch

Founder and President, CNC Concepts Inc.

• How often are program modifications required at the CNC machine?

The more varieties of work a company takes on, the more often it has to handle new and unfamiliar processes. This often equates to imperfect CNC programs that must be optimized at the CNC machine, at the very least. More likely, unfamiliar processes will require more substantial program modifications once the job hits the machine.

Another condition that requires at-the-machine program changes is variation from one time a job is run to the next. Variations in material hardness, raw material, cutting tool selection and workholding setup will cause a program that ran well in the past to fail in the future. The long-term solution is to eliminate the variations, but if they occur, programs have to be changed at the machine.

Program modifications required at the machine must be done at G-code level. A programmer shouldn’t have to go back to the CAM system for every minor program edit. At the very least, programmers must be able to change cutting conditions such as speeds, feeds and depths of cut. With processing mistakes, programmers may also have to change the machining sequence— as in running one tool before another. They should also be able to catch and eliminate wasteful motions.

• How well optimized is the CAM system?

Most CAM systems allow users to fine-tune almost every aspect of CNC program creation. Doing so enhances efficiency and requires a good understanding of G code. Once the CAM system is optimized, a person with lesser G-code skills can use it.

CAM systems vary with regard to how well optimized they are when they are first purchased. Some users set the defaults for worst case scenarios. While this may make them safer to use, especially for beginning CAM system programmers, the G-code programs they output will not be very efficient.

A programmer must be able to recognize wasteful G code. Programmers can watch a program run and notice obvious wasteful functions. These include wasted rapid motions such as approaching and retracting in one axis at a time as well as independently activated functions that could be activated simultaneously (such as spindle start within an approach motion).

Less obvious functions for machining centers include readying the next tool while the current tool is machining as well as orienting the spindle during the cutting tool’s retract to the tool-change position. Less obvious functions for turning centers include inappropriate use of constant surface speed, which can lead to wasted time; undue wear-and-tear on the spindle drive system; wasted electricity; and the absence of spindle range changes that can keep the spindle running at the appropriate speed for rough-machining operations.

There are many ways to improve the efficiency of G-code level CNC programs. In order to incorporate any of them into the G-code programs created by CAM systems, the programmer must understand the related G code.

• How complex is your work?

While CAM systems are great for simplifying complex work, they don’t tend to be as helpful with simple work. Generally speaking, many of the same tasks required to generate the program for a complex workpiece must also be done to create the program for a simple workpiece. For simple work, writing the program at G-code level (manual programming) may be easier than using the CAM system.

• How often are process changes made?

The more work you do of a similar nature, the more likely you are to use the same cutting tools for a variety of different jobs. If a process change is made that requires a change in cutting tools, it is probable that all of the programs that used the old cutting tool will need to be changed. The more programs you have, the more daunting this task will be. Depending on the complexity of the required changes, it may be faster and easier to make the changes at G-code level than from within the CAM system.

• Do you ever get program alarms when running new programs?

If a CNC machine sees a command it cannot execute, it will generate an alarm—regardless of whether the program was created manually or with a CAM system. The programmer must be able to diagnose and correct the problem that caused the alarm. While the alarms are pretty specific, it can still be a challenge to fix the program once the reason for the alarm is understood. A good understanding of G code will be required to do so.

Related Content

Turning Machines 16 Aug 2024

4 Commonly Misapplied CNC Features

Misapplication of these important CNC features will result in wasted time, wasted or duplicated effort and/or wasted material.

CNC & Machine Controls 20 Sep 2023

6 Machine Shop Essentials to Stay Competitive

If you want to streamline production and be competitive in the industry, you will need far more than a standard three-axis CNC mill or two-axis CNC lathe and a few measuring tools.

Basics 29 Nov 2024

How to Mitigate Risk in Your Manufacturing Process or Design

Use a Failure Mode and Effect Analysis (FMEA) form as a proactive way to evaluate a manufacturing process or design.

Aerospace 11 Sep 2024

How to Meet Aerospace’s Material Challenges and More at IMTS

Succeeding in aerospace manufacturing requires high-performing processes paired with high-performance machine tools. IMTS can help you find both.

Automation

AMRs Are Moving Into Manufacturing: 4 Considerations for Implementation

AMRs can provide a flexible, easy-to-use automation platform so long as manufacturers choose a suitable task and prepare their facilities.

Basics

Machine Shop MBA

Making Chips and Modern Machine Shop are teaming up for a new podcast series called Machine Shop MBA—designed to help manufacturers measure their success against the industry’s best. Through the lens of the Top Shops benchmarking program, the series explores the KPIs that set high-performing shops apart, from machine utilization and first-pass yield to employee engagement and revenue per employee.

91��Ƶ

When Programmers Should Know G Code