Make Maximum Use of the Magazine

Published 6/3/2011

Make Maximum Use of the Magazine

This shop streamlined its selection of cutting tools to machine a number of parts on a pallet system. Cutting down on cutters delivered other benefits as well.

Peter Zelinski

Former Editor-in-Chief, Additive Manufacturing

The six-machine pallet system at Precise machines 142 part numbers.

The system is dedicated to aluminum parts for the Boeing 737.

Two end mills are ordered in custom lengths for the pallet-system machining centers. These lengths are ideal for reaching a wide range of features across various part numbers. These two tools, along with a face mill, account for most of the pallet system’s milling work.

How do you get 60 tools to run 142 part numbers? For Precise Machining & Manufacturing of Tulsa, Oklahoma, answering that question was key to dramatically improving productivity in the production of aluminum aircraft parts.

A contract manufacturer specializing in aerospace work, Precise recently installed a pallet system from Makino for machining various aluminum components related to the Boeing 737. The automated system consists of six Makino a61 horizontal machining centers sharing a row of 26 pallets. The virtue of such a system is the way it makes use of time the company would have lost, back when it manufactured the parts on stand-alone machines. For example, all the machines can keep cutting while operators stage work at the system’s load/unload stations. The machines can also keep cutting through long, unattended night shifts, with pallets automatically sent to the machines until all the work in the queue has been run. Thanks to these advantages, the six-machine cell processes work at a rate that formerly required two to three times as many machine tools to achieve.

But getting to this level of productivity did entail challenges. Processes had to be re-engineered for the pallet-system machines. In particular, the choices in cutting tools had to change, because each machine has capacity for only 60 tools. That capacity might seem like plenty on a stand-alone machining center, because the operator can load different tools with each new part’s setup. In the pallet system, though, an operator doesn’t touch the machine as frequently. Whatever cutters are in the machine have to be sufficient to run the entire series of part numbers that will shuttle in before the operator returns. Plus, in order for the machines to be interchangeable, they have to have the same selection of tools in each magazine. Owing to these factors, Precise’s best choice was to find one standard set of 60 tools that could machine any of the system’s part numbers. To do this, Precise had to dramatically prune the number of cutters from which its engineers can choose.

Wes Viddaurri is one of the Precise employees staffing the pallet system area. He also used to machine some of the same part numbers on stand-alone machines. He says one of the more important ways the parts’ processes have been re-engineered relates to machining holes. Many that used to be drilled and reamed, and sometimes center drilled before either of these steps, are now machined through helical interpolation milling. For one hole, an end mill used in this way can replace three tools. Yet the replacement is even larger than this, because that one end mill can machine various hole sizes. Thanks to helical milling, the shop has been able to eliminate eight different holemaking tools from the pallet-system tool magazine, allowing the work of these tools to be done by a single 1/4-inch end mill.

Yet getting the standard tool set down to 60 meant consolidating milling tools as well. After keeping many tools that couldn’t be eliminated because of their application to unusual features, the shop was left with very few positions for general material removal. Therefore, across all the part numbers run in the pallet system, Precise now does most of its basic milling work with just three tools. They are a face mill from Seco Tools and two 3/4-inch end mill styles from Gorilla Mill.

Toolroom manager Randy Miller says the latter tools were customized for Precise’s needs. A custom lead angle on the end mills seemed to deliver better performance in the shop’s processes. Gorilla Mill worked with the shop to tailor the angle accordingly. In addition, the shop specifies particular lengths that were chosen carefully. Looking at all the part numbers run on the pallet-system machines, he says the company determined that two specific lengths would extend the cutters far enough to reach the maximum number of features, while still keeping the tools short enough to maintain acceptable stability. Thus, the tool vendor now supplies the end mills to Precise in the non-standard lengths of 1.8 inch for a two-flute tool, and 2.8 inches for a tool with three flutes.

Mr. Viddaurri says consolidating the number of tools has also proven valuable for reasons beyond just getting more part numbers into the system. Another benefit of having fewer tools relates to troubleshooting an unattended process. If parts are trending out of tolerance, then having fewer tools limits the number of factors that need to be examined in search of the cause.

Still another benefit relates to optimizing the process. A shop that routinely uses hundreds of tools probably does not have a hope of understanding all of them well. But when a much smaller number of tools do most of the work, the shop is much better able to understand each of them. With just three tools doing much of the pallet system’s milling, Precise has been able to learn precisely what speed and feed rate it can achieve from each of these tools in various cutting conditions, and what tool life to expect. Because these few cutters are so vital, the shop has been able to maximize the value it gets from each one.

Related Content

Machining Centers 27 Nov 2024

How to Determine the Currently Active Work Offset Number

Determining the currently active work offset number is practical when the program zero point is changing between workpieces in a production run.

Five-Axis 4 Dec 2024

Inside a CNC-Machined Gothic Monastery in Wyoming

An inside look into the Carmelite Monks of Wyoming, who are combining centuries-old Gothic architectural principles with modern CNC machining to build a monastery in the mountains of Wyoming.

Five-Axis 4 Mar 2024

How to Successfully Adopt Five-Axis Machining

While there are many changes to adopt when moving to five-axis, they all compliment the overall goal of better parts through less operations.

The Future of High Feed Milling in Modern Manufacturing

Achieve higher metal removal rates and enhanced predictability with ISCAR’s advanced high-feed milling tools — optimized for today’s competitive global market.

Basics

Machine Shop MBA

Making Chips and Modern Machine Shop are teaming up for a new podcast series called Machine Shop MBA—designed to help manufacturers measure their success against the industry’s best. Through the lens of the Top Shops benchmarking program, the series explores the KPIs that set high-performing shops apart, from machine utilization and first-pass yield to employee engagement and revenue per employee.

Automation

AMRs Are Moving Into Manufacturing: 4 Considerations for Implementation

AMRs can provide a flexible, easy-to-use automation platform so long as manufacturers choose a suitable task and prepare their facilities.

91��Ƶ

Make Maximum Use of the Magazine

Share

Related Content

How to Determine the Currently Active Work Offset Number

Inside a CNC-Machined Gothic Monastery in Wyoming

How to Successfully Adopt Five-Axis Machining

The Future of High Feed Milling in Modern Manufacturing

Read Next

Machine Shop MBA

AMRs Are Moving Into Manufacturing: 4 Considerations for Implementation

Country

Industries Served

Operations Performed

Welcome to Modern Machine Shop!

91��Ƶ

Make Maximum Use of the Magazine

Share

Heidenhain Corporation

Featured Content

Featured Videos

SMW Autoblok Corporation

Featured Content

Featured Videos

CNC Engineering, Inc.

Featured Content

Featured Videos

Mikron Corp.

Featured Content

Featured Videos

T J Davies, Co., Inc.

Featured Content

ZEISS Industrial Quality Solutions

Featured Content

Featured Videos

All World Machinery Supply

Featured Content

Featured Videos

QualiChem Inc.

Featured Content

Featured Videos

Related Content

How to Determine the Currently Active Work Offset Number

Inside a CNC-Machined Gothic Monastery in Wyoming

How to Successfully Adopt Five-Axis Machining

The Future of High Feed Milling in Modern Manufacturing

Read Next

Machine Shop MBA

AMRs Are Moving Into Manufacturing: 4 Considerations for Implementation

Country

Industries Served

Operations Performed

Welcome to Modern Machine Shop!