Multifunctional Table-Type Boring, Milling Machines
The Speedmat 2, 3 and 4 models comprise Pama’s multifunctional, table-type boring and milling machine range. The boring spindle is available in two different sizes, 130 or 160 mm, and table sizes range from 1,250 × 1,250 mm to 2,000 × 2,500 mm.
Share
The Speedmat 2, 3 and 4 models comprise Pama’s multifunctional, table-type boring and milling machine range. The boring spindle is available in two different sizes, 130 or 160 mm, and table sizes range from 1,250 × 1,250 mm to 2,000 × 2,500 mm. Two independent, cast iron beds form a “T” configuration to support the movement of the column and the table. The machines are suited for the aerospace, heavy construction, diesel engine, die and mold, earthmoving, shipbuilding and power-generation industries.
Related Content
-
The Impact of Cutting Teeth Spacing on Machining Stability
Many cutter designs are available, and variable teeth spacing (or variable pitch) cutters can be used to influence milling stability. Let’s discuss why teeth spacing affects stability.
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.
-
Briquetting Manufacturer Tools Up for Faster Turnaround Times
To cut out laborious manual processes like hand-grinding, this briquette manufacturer revamped its machining and cutting tool arsenal for faster production.