Published
Setup Time Savings from a Long X Axis
Bertsche Engineering developed the X-Flex Center to replace three standard-size machining centers.
Former Editor-in-Chief, Additive Manufacturing
Share
A Tier 1 maker of aircraft structural assemblies wanted to replace three standard-size machining centers with one machine that could also do long parts. Bertsche Engineering says it responded by developing the “X-Flex Center” seen here. The machine is like a pallet system inside of one long machining center. Various tables along the length of this machine’s X-axis travel allow various setups from the old machining centers to remain in place simultaneously, minimizing delay time between different part numbers. Meanwhile, by using long T-slot tables to bridge these base tables, this machine can also handle workpieces up to 240 inches long.
The machine has two work zones, Bertsche notes. This further avoids setup time delays, because it allows work to be set up in one area of the machine while the machine is cutting a part in another area. Each of these work zones is equipped with its own independent toolchanger.
Related Content
-
The Cut Scene: The Finer Details of Large-Format Machining
Small details and features can have an outsized impact on large parts, such as Barbco’s collapsible utility drill head.
-
Inside a CNC-Machined Gothic Monastery in Wyoming
An inside look into the Carmelite Monks of Wyoming, who are combining centuries-old Gothic architectural principles with modern CNC machining to build a monastery in the mountains of Wyoming.
-
How a Custom ERP System Drives Automation in Large-Format Machining
Part of Major Tool’s 52,000 square-foot building expansion includes the installation of this new Waldrich Coburg Taurus 30 vertical machining center.
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement