Top Shops 2012: Hoyt USA

91��Ƶ

Inspection and Measurement 5 May 2025

How To (Better) Make a Micrometer
Basics 2 May 2025

Chatter and Feed Rate Scheduling
SPONSORED 1 May 2025

Automation is for Everyone
SPONSORED 1 May 2025

The Smarter Way to Take Full Control of Your CNC Machine Shop
Data-Driven Manufacturing 30 Apr 2025

The Shift Toward Smarter Shops: Real-World Stories of Data-Driven Manufacturing
28 Apr 2025

How I Made It: Mark and Nancy Rohlfs
Turning Machines 25 Apr 2025

How I Made It: Aneesa Muthana
23 Apr 2025

3 Strategies for Effective CNC Programming Standardization
Turning Machines 22 Apr 2025

3 Trends From PMTS 2025
Data-Driven Manufacturing 21 Apr 2025

Enhancing the Shop Floor with AI

Published 7/5/2012

Top Shops 2012: Hoyt USA

Lean manufacturing has enabled this company to become more efficient at producing its advanced bows.

Top Shops

Derek Korn

Editor-in-Chief, Production Machining magazine

Applying Lean Leads to Success

Art Santana, the machine shop operations manager for Hoyt USA, says the combination of advanced equipment, lean principles, continuous improvement, quality-oriented personnel and the drive to deliver customer satisfaction enables the company to produce the best bows in the world.

Hoyt USA became a major player in archery circles in the early 1990s. That’s when CNC machine tools became more affordable, and when the company began producing bow risers (the main center section of a bow) from aluminum instead of the more commonly used magnesium.

More recently, lean manufacturing has enabled the company to become more efficient at producing its advanced bows. Mr. Santana says the company started looking into lean in earnest four years ago. It took some of the concepts from the Toyota lean strategy to create what it calls the “Hoyt System.” One area this approach concentrates on is minimizing setup times. Using quick-change fixturing and locating devices and related equipment, the company has reduced setup times from nearly 2 hours to 10 minutes.

Hoyt also concentrates on streamlining product flow through its shop. One-piece flow was deemed overly complicated for its production needs, but the company has effectively implemented a kanban system to flow product more efficiently. In addition, Hoyt has benefited from adopting standard work principles, in which products are produced at a specified pace. The main components of standard work are balancing production with a specific takt time, specifying standard work in process levels and defining the sequence of operations for each employee.

That last item can be challenging, because employees who believe they know a better way to produce parts sometimes want to stray from the established process. However, Mr. Santana points out that it’s important that employees apply the procedures that have been put in place. That said, the company is always open to suggestions that may improve its processes. This includes ideas that may lead to just small improvements, because those add up over time. As it began its lean journey a few years ago, company management wasn’t sure how valuable shopfloor employees would prove to be in terms of offering suggestions for improvements. Over the last 1.5 years, though, many good suggestions have come from shopfloor employees who know that management is genuinely open to hearing and considering their ideas. On average, employees now offer 15 to 18 continuous improvement ideas per month.

Company Description

Archery is more than a job at Hoyt: It’s a way of life that drives the company to build the best bows it can. Hoyt is home to a family of like-minded bow fanatics driven to produce what it feels is the highest quality, best-shooting and most trust-worthy bows on the market.

Earl Hoyt Jr. and his father started the company in a small garage in St. Louis, Missouri, in 1931. In 2011, as it celebrated its 80th anniversary, Hoyt built a new, state-of-the-art 150,000-square-foot manufacturing facility in Salt Lake City, Utah and further expanded its engineering and R&D capabilities. The facility is a massive upgrade and continues the Hoyt tradition of keeping its precision manufacturing under its own roof, proudly building its bows in the United States. The facility houses Hoyt’s CNC machine shop, precision composite limb lamination and fabrication cells, carbon production lines, custom paint and finishing booths, and all final assembly and fulfillment functions. The company feels this new facility will enable it to push the envelope like never before and continue to offer innovative, industry-leading products and technologies.

End Markets Served

Hunting Archery
Target/Field Archery
Olympic Archery

Workpiece Materials Commonly Machined

Aluminum 6061 T6

Contact Information

Hoyt USA

593 Wright Brothers Drive

Salt Lake City, Utah 84116

Phone: 801-363-2990

Fax: 801-537-1470

Related Content

Top Shops 16 Apr 2025

Last Chance! 2025 Top Shops Benchmarking Survey Still Open Through April 30

Don’t miss out! Modern Machine Shop's Top Shops Benchmarking Survey is still open — but not for long. This is your last chance to a receive free, customized benchmarking report that includes actionable feedback across several shopfloor and business metrics.

Top Shops 8 Feb 2024

Complete the 2024 MMS Top Shops Survey

Top Shops 23 Sep 2024

Top Shops: Designing a Shop to Meet Customer Needs

Working closely with customers and making careful investments has enabled this Wisconsin machine shop to tackle difficult jobs with tight deadlines as a core part of its business.

Aerospace 11 Sep 2024

How a Custom ERP System Drives Automation in Large-Format Machining

Part of Major Tool’s 52,000 square-foot building expansion includes the installation of this new Waldrich Coburg Taurus 30 vertical machining center.

Top Shops

Machine Shop MBA

Making Chips and Modern Machine Shop are teaming up for a new podcast series called Machine Shop MBA—designed to help manufacturers measure their success against the industry’s best. Through the lens of the Top Shops benchmarking program, the series explores the KPIs that set high-performing shops apart, from machine utilization and first-pass yield to employee engagement and revenue per employee.

Automation

AMRs Are Moving Into Manufacturing: 4 Considerations for Implementation

AMRs can provide a flexible, easy-to-use automation platform so long as manufacturers choose a suitable task and prepare their facilities.

91��Ƶ

Top Shops 2012: Hoyt USA

Share

Applying Lean Leads to Success

Company Description

End Markets Served

Workpiece Materials Commonly Machined

Contact Information