Variable Rake End Mills
SGS Tool Company’s Z-Carb-AP variable rake end mill offers three stages of chatter suppression resulting in a quiet, stable milling operation. In stage one, unequal flute spacing disrupts the rhythmic pattern created by the cutting edge of common end mills. This suppresses the development of damaging harmonics.
Share
SGS Tool Company’s Z-Carb-AP variable rake end mill offers three stages of chatter suppression resulting in a quiet, stable milling operation.
In stage one, unequal flute spacing disrupts the rhythmic pattern created by the cutting edge of common end mills. This suppresses the development of damaging harmonics.
In stage two, the unequal helix design aids in eliminating the damaging harmonics by changing the angle at which each cutting edge enters and exits the material during the milling process.
In stage three, the rake angle determines the size and shape of the chip, as well as the pressure and temperature of the cutting zone. By incorporating the company’s variable rake geometry, the end mill can alter and control cutting dynamic, which suppresses chatter.
The end mill also offers enhanced corner geometry with a tighter tolerance corner radius for more accurate machining and geometry that offers improved shearing capabilities while producing less tool pressure. Lower cutting forces promote longer tool life. Tool life is also extended through the use of the company’s Ti-Namite-A (AlTiN) coating.Â
Related Content
-
Five Common Mistakes Shops Make with ER Collets (And How to Prevent Them)
Collets play a crucial role in the machining process, so proper tool assembly and maintenance is important. Here are five potential pitfalls to avoid when using ER collets.
-
Shoulder Milling Cuts Racing Part's Cycle Time By Over 50%
Pairing a shoulder mill with a five-axis machine has cut costs and cycle times for one of TTI Machine’s parts, enabling it to support a niche racing community.
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.
