VMC Enables Lean Small-Part Production
Enshu USA’s GE300Ve vertical machining center is specifically designed for efficient production of small parts in a lean line.
.jpg;width=70;height=70;mode=crop;format=webp)
Share
Enshu USA’s GE300Ve vertical machining center is specifically designed for efficient production of small parts in a lean line. The machining center’s 1,150 × 3,200-mm footprint makes it possible to install multiple machines side by side within a limited amount of floor space, reducing workpiece transport time. Overhead gantry access or robot loading enables multiple GE300Ve machining centers to be used with unmanned automation systems.
The X-, Y- and Z-axis travels measure 600 × 600 × 400 mm, giving the VMC the loading capacity and space to accommodate an NC rotary table. Rapid traverse rates are 50,000 mm/min. (1,969 ipm). The machining center is available with either a 13,000-rpm, 30-taper spindle or an 8,000-rpm, 40-taper spindle. It is equipped with a 24-tool-capacity magazine and a FANUC 0i-MD control.
Related Content
-
Inside a CNC-Machined Gothic Monastery in Wyoming
An inside look into the Carmelite Monks of Wyoming, who are combining centuries-old Gothic architectural principles with modern CNC machining to build a monastery in the mountains of Wyoming.
-
4 Commonly Misapplied CNC Features
Misapplication of these important CNC features will result in wasted time, wasted or duplicated effort and/or wasted material.
-
High RPM Spindles: 5 Advantages for 5-axis CNC Machines
Explore five crucial ways equipping 5-axis CNC machines with Air Turbine Spindles® can achieve the speeds necessary to overcome manufacturing challenges.