IMCO Carbide Tool Inc. Suppliers Showroom

IMCO End Mills Enable Aggressive Cutting Action

Pow-R-Feed M934 cutters feature fine cutting edges with optimal strength, plus a wiper flat end for smooth floor finishes.

IMCO Cutting Tools Boost Metal Removal Rates

IMTS 2024: IMCO’s M934 and M935 cutting tools for three- to five-axis machines are designed to optimize, feed rates, balance and chip throw.

IMCO End Mills Enable Aggressive Cutting Parameters

Westec 2023: M936 Pow-R-Feed end mills enables users to make toolpath moves without slowing down.

IMCO Carbide Tool Inc. End Mills Provide Faster Part Cycles

The M936 Pow-R-Feed series is designed to make various toolpath moves without slowing down, providing faster cycle times and more production.

Ball-End Tool Contours, Chamfers and Finishes in One Pass for Most Materials

The new IMCO Carbide Tool Pow•R•Arc end mill, to be shown at IMTS 2022, emphasizes speed. The cutter is able to run and increase feed rates to machine one’s mold up to five times faster than a four-flute tool.

IMCO ToolBot Resource Individually Tailors Feeds and Speeds

IMCO’s free, online ToolBot resource uses simple parameters to optimize users’ carbide end mill feeds and speeds.

Video: HEM Versus Conventional Machining

A short video illustrates the differences between conventional machining with multiple shallow passes versus high-efficiency machining with a tool designed for deeper cuts.

Seven-Flute Cutters Maximize High-Efficiency Machining Benefits

Imco Carbide Tool offers its Pow-R-Path IP cutting tools designed to maximize the benefits of high-efficiency machining methods such as those which use continuous tool paths.

End Mills Reduce Stress in Cutting High-Temperature Alloys

IMCO Carbide Tool’s Inconex M8 series end mills are designed for machining high-temperature alloys including Inconel, Hastalloy, Waspalloy and more.

End Mills Improve Productivity in Hardened Steels

The Omega M7 line of end mills from Imco Carbide Tool is designed for machining hardened steels ranging to 58 to 62 HRc, running wet or dry.

End Mill’s Reinforced Edges, Coating Boost Metal Removal

Suited for high-volume operations, Imco Carbide Tool’s Pow-R-Feed M924 end mill features reinforced, optimized cutting edges and an AlCrNX-engineered coating.

Inconel Meets Match in General-Purpose End Mill

This difficult Inconel application demonstrates that even some basic tool designs can perform admirably when paired with the right tool paths.

Tooling Catalog Features Case Studies

Imco’s 170-page guide is designed with the look of a trade magazine.

Tool Line Complements Titanium, Stainless Techniques

A notable trend over the past five years or so has been the evolution of techniques for machining hard, difficult-to-cut materials, particularly titanium and stainless steel.

Catalog Features Tools For Increased Productivity

The 2010 full-color catalog from Imco Carbide Tool features case studies and user testimonials that include tips for increased productivity, sustained performance and extended tool life.

91��Ƶ