Turning On A Machining Center
VIDEO. Part of Renishaw’s automated production process, this turning operation uses tools affixed to the machining center’s table while the workpiece is mounted in the spindle.
Share
An automated production process on machining centers at Renishaw’s UK manufacturing facility uses those machining centers even to perform turning.
The overall process goes by the acronym RAMTIC, for Renishaw’s Automated Milling, Turning and Inspection Center. An article under “Editor Picks” at right describes the process in more detail.
The machining-center turning operation, show in this video, uses stationary cutting tools mounted on the table. The workpiece loads in the spindle using toolholder-like shanks. The workpiece length is then measured using a toolsetting probe.
To turn the part, the machining center feeds it (while it’s spinning) against the stationary cutting tool. Y-Z interpolation permits precisely contoured turned profiles.
Related Content
-
4 Commonly Misapplied CNC Features
Misapplication of these important CNC features will result in wasted time, wasted or duplicated effort and/or wasted material.
-
How to Successfully Adopt Five-Axis Machining
While there are many changes to adopt when moving to five-axis, they all compliment the overall goal of better parts through less operations.
-
6 Machine Shop Essentials to Stay Competitive
If you want to streamline production and be competitive in the industry, you will need far more than a standard three-axis CNC mill or two-axis CNC lathe and a few measuring tools.