Video: High Feed Milling in Aluminum
Footage shows roughing at 48 cubic inch per minute on a standard-speed machining center.
Share
This video shot by Boeing St. Louis shows a 4-flute, 2-inch-diameter high feed mill from Iscar machining aluminum at 0.080 axial depth of cut and 300 ipm for a metal removal rate of 48 cubic inches per minute. Boeing often recommends the use of high feed milling as part of a strategy for making efficient use of lower-rpm machining centers. For more, see the article under “Editor Picks” at right.
Related Content
-
The Future of High Feed Milling in Modern Manufacturing
Achieve higher metal removal rates and enhanced predictability with ISCAR’s advanced high-feed milling tools — optimized for today’s competitive global market.
-
Stability Maps for Milling
Selecting stable radial depths of cut for 2.5D milling.
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.